Explore straightforward explanations of service methods, surface risks, tools, maintenance choices, and the point where routine cleaning becomes corrective work.
Classify uncured smear, cured residue, rundown, tooling film, surface damage, and the working joint separately, then test a compatible removal method without cutting the seal or scratching glass.
Read guideTrace colored streaks to their source, distinguish iron oxide from other metal deposits and glass damage, test compatible removal, and repair the runoff path before restoration.
Read guideDistinguish loose debris from fused hot-particle damage, protect glass before hot work, inspect the assembly, and test restoration only where strength, coatings, and optics permit.
Read guideSeparate chemical residue from altered glass, identify the source and glazing surface, use a controlled restoration test, and recognize damage that should not be polished in place.
Read guideSeparate mortar and concrete residue, efflorescence, sealers, silicone, metal runoff, and acid-altered glass, then stop the source and choose routine cleaning, controlled restoration, or replacement.
Read guideAgree on inspection conditions before polishing, separate defect detection from acceptance, fix viewing geometry, document residual marks and optical change, and close each pane consistently.
Read guideBuild a temperature map, measure repair and reference zones, control friction and solar loading, interpret infrared readings, and pause before thermal stress becomes glass failure.
Read guideMap the spray pattern, correct irrigation overspray and misting, identify glass and water chemistry, distinguish removable deposit from surface change, and test restoration safely.
Read guideIdentify plies and interlayers, protect exposed perimeters from incompatible liquids and vapors, recognize edge clouding or bubbles, and keep polishing in its proper scope.
Read guideMap numbered surfaces, use project records and supporting observations, separate coating damage from glass damage, and establish a hard stop before abrasive restoration.
Read guideA decision matrix for separating surface defects from cracks, chips, seal failure, frame problems, coating loss, optical limits, and safety-glazing requirements.
Read guideHow heat treatment, fabrication particles, construction debris, coatings, scraper technique, and documentation affect scratch risk without making every pane suspect.
Read guideHow to identify and test paint, mortar, silicone, stickers, adhesive, fabrication debris, and permanent construction damage without turning cleanup into scratches.
Read guideHow technicians assess scratch depth, choose a correction path, refine abrasive marks, polish for clarity, control heat, and limit optical distortion.
Read guideHow to select, document, process, and inspect a representative test area before committing an entire pane or elevation to restoration.
Read guideA controlled way to separate removable residue from mineral scale, altered glass, coating damage, and insulating-glass fog before choosing a process.
Read guideUse the email and password tied to your customer profile.
Choose the fastest way to reach the Metro Surface Solutions team.
